Crack Injection Kits

Other than death and taxes, one sure thing is that concrete will eventually crack. This can occur from either structural or non-structural reasons. Foundations or grounds settle and something has to give and the result is usually a crack in the foundation wall. Or the underlying cause may be something as simple as the concrete as it cures and dries out shrinks, cracks develop. And if there’s a crack, water will find a way to come in at some point or another.

HouseGuard™ TruStop™ Crack Injection Kits contain all you need for any crack repair, the materials are easy to use and quickly seal foundation cracks. Our three part TruStop™ Injection Kit System™ contains, Grout, Catalyst and Injection Ports. TruStop™ Grout and Catalyst are used with HouseGuard™ Disposable Injection Guns (sold separately) to inject and seal the most difficult cracks. TruStop™ Grout is a multi-purpose injection resin designed to seal leaking cracks, voids, or fractures in concrete surfaces. TruStop™ Catalyst activates the Grout to react with moisture in the concrete surface, expanding and crosslinking to form a watertight seal. When using TruStop Grout a 15-second reaction time may be achieved by mixing 1 part of TruStop Catalyst to 8 parts Grout. Faster reaction times may be achieved by use of additional Catalyst. TruStop™ Injection Ports are 5/8" mechanical ports constructed of a brass stem, extruded rubber bladder and ¼" X 28 grease injection type fitting. TruStop™ Crack Injection Kits come in three sizes: the TruStop™ Sample Kit, equipped with enough product to repair up to 2 cracks ; the Starter Kit, will supply you with the right amount of product to complete up to 14 cracks, and the Bulk Kit, a larger quantity of product for up to as many as 60 cracks.

Click below to get more information regarding the TruStop Crack Injection kit for your crack sealing needs.

TruStop™ Crack Injection Kits